Group annunciator


Group annunciator
LuxcoLuxco > Business > Group annunciator

Continuous business innovation and R&D to contribute to the development of
national Industry

Continuous management innovation for systematic R&D based on drastic investment can contribute to industrial
development through regional and national companies in a variety of efforts and attempts to become.

Group annunciator

  • SA TYPE
  • SBGA TYPE
 
 
The group annunciator of SA SERIES(DOUBLE POINT), as a high performance alarm device responding to the various alarm events, has the function satisfying the international standards, that is making the visible / audible alarm internally and the secondary alarm externally in case of detecting the abnormal signal.
The SA SERIES has two alarm circuits in one ALARM CARD and enables the installation space to reduce and has also the scalability up to 1,000 POINTS in maximum by using the extensible models.
As special features, the exterior materials have high insulation level, light weight, fire retardant, shock resistant and chemical resistant characteristics to endure the harsh environment such as shipyard, power plant, steelworks, petrochemical complex and water power plant etc..
 
 

ORDERING INFORMATION

 

ELECTRICAL SPECIFICATIONS

POWER RATING DC 24V
POWER VARIATION DC 18~35V
TIMER ACCURACY Less than ±1%
SETTING Flickering range [V/R] : 1~3T /sec.
Alarm delay range [V/R] : 0~30sec.
INPUT
SIGNAL
TYPE "NO" or "NC" contact
[select by dip s.w on each alarm card]
LOOP CURRENT Below 10mA per each point
CABLE LENGTH within 1000m [Above 0.75 SQ]
OUTPUT
SIGNAL
VISUAL LAMP RATING 2W [max.]
OUTPUT CONTACT
FOR BUZZER
DC 30V 1.0A [resistive]
DC 30V 0.4A [inductive p.f=0.4]
EXTENSION
ALARM
SA SERIES SSR OUTPUT : DC 24V 0.2A [max.]
SBGA SERIES DC 24V 2A [resistive] 0.8 [inductive p.f=0.4]
AC 120V 1A [resistive] 0.4 [inductive p.f=0.4]
SECONDARY ALARM "NC" dry contact
INSULATION RESISTANCE Above 200㏁ between
live part and enclosure
SURGE TRANSIENT 1kV 50uVs line / line
0.5kV 50uVs line / line
[IEC 1000-4-5 / 1995]
 

LOAD CONSUMPTION TABLE (POWER SUPPLY : DC24V)

MODEL SA-6PSM SA-12PSM SA-20PSM SA-30PSM
TOTAL CURRENT CONSUMPTION Below 92mA Below 135mA Below 190mA Below 260mA
RECOMMENDED POWER SUPPLY WITH VISUAL LAMP(2W) Above 1.0A Above 1.7A Above 2.7A Above 4.1A
 
※ For details, please refer to the catalog data.
 
 
The group annunciator of SBGA SERIES(SINGLE POINT), as a high performance alarm device responding to the various alarm events, has the function satisfying the international standards, that is making the visible / audible alarm internally and the secondary alarm externally in case of detecting the abnormal signal.
The SBGA SERIES has the scalability up to 1,000 POINTS in maximum by using the extensible models.
As special features, the exterior materials have high insulation level, light weight, fire retardant, shock resistant and chemical resistant characteristics to endure the harsh environment such as shipyard, power plant, steelworks, petrochemical complex and water power plant etc..
 
 

ORDERING INFORMATION

 

ELECTRICAL SPECIFICATIONS

POWER RATING DC 24V
POWER VARIATION DC 18~35V
TIMER ACCURACY Less than ±1%
SETTING Flickering range [V/R] : 1~3T /sec.
Alarm delay range [V/R] : 0~30sec.
INPUT
SIGNAL
TYPE "NO" or "NC" contact
[select by dip s.w on each alarm card]
LOOP CURRENT Below 10mA per each point
CABLE LENGTH within 1000m [Above 0.75 SQ]
OUTPUT
SIGNAL
VISUAL LAMP RATING 2W [max.]
OUTPUT CONTACT
FOR BUZZER
DC 30V 1.0A [resistive]
DC 30V 0.4A [inductive p.f=0.4]
EXTENSION
ALARM
SA SERIES SSR OUTPUT : DC 24V 0.2A [max.]
SBGA SERIES DC 24V 2A [resistive] 0.8 [inductive p.f=0.4]
AC 120V 1A [resistive] 0.4 [inductive p.f=0.4]
SECONDARY ALARM "NC" dry contact
INSULATION RESISTANCE Above 200㏁ between
live part and enclosure
SURGE TRANSIENT 1kV 50uVs line / line
0.5kV 50uVs line / line
[IEC 1000-4-5 / 1995]
 

LOAD CONSUMPTION TABLE (POWER SUPPLY : DC24V)

MODEL SBGA-3P1WM SBGA-6P1WM SBGA-10P1WM SBGA-15P1WM
TOTAL CURRENT CONSUMPTION Below 95mA Below 140mA Below 200mA Below 275mA
RECOMMENDED POWER SUPPLY WITH VISUAL LAMP(2W) Above 0.5A Above 1.0A Above 1.5A Above 2.0A
 
※ For details, please refer to the catalog data.
 

  • [Ulsan Factory] 24 Hwalbam-ro, Buk-gu, Ulsan (814 Hyomun-dong)TEL +82-52-280-0800 FAX +82-52-287-8598
  • [Busan Factory] 3F, 122 Mieumsandan 3-ro (Mieum-dong), Gangseo-gu, Busan TEL +82-51-260-1300 FAX +82-51-260-1399
  • [Busan Technology Research Center] 2F, 122 Mieumsandan 3-ro (Mieum-dong), Gangseo-gu, Busan TEL +82-52-260-1300 FAX +82-51-260-1399
  • [Eonyang Factory] 58, Galjeon-gil, Eonyang-eup, Ulju-gun, Ulsan (663-42 Pyeong-ri)TEL +82-52-280-0700 FAX +82-54-556-8581
Copyright © 2014 LUXCO Co.,Ltd. All rights reserved.
Top